More Specifications:

Custom
Installation
Options
Hardware
Materials

Board: Slatwall is produced from a 48 Ib. medium density fiberboard (MDF) and has an internal bond strength of 110 Ibs. per square inch. MDF has a linear expansion of.30% and a moisture content of 6-8%. The tolerance on the squareness of the board guaranteed by the manufacturing mill is 1/8" when measured across the diagonals of the board. The screw holding capacity for the face is 350 Ibs. and 275 Ibs. for the edges. Other plywoods, veneers, fire-rated and 150lb. internal bond boards are available upon request.

High Pressure Laminate: Wilsonart, Formica, Nevamar, Pionite, and other brands of high pressure laminates are available. These products come in vertical (.030") thickness as well as standard and post-forming grades (.50").

Specifications & Tolerances: Board length and width + or - .0625", squareness + or - .125" diagonally. groove dimensions : groove - .25",lip .25", back .25", opening .375".

Melamine Panels: This product is a post-impregnated melamine paper adhered under heat and pressure directly to MDF board. It provides an excellent alternative to the high pressure laminates for vertical applications at a lower cost.

-More Specs-